Motorola

Motorola Moto E3 Power XT1706

Motorola_Moto_E3_Power_XT1706_MT6735M_S135_161108_6.0.1.zip
June 16, 2026 Motorola 840 MB Motorola

Motorola Moto E3 Power XT1706 is a Motorola firmware file listed under Motorola, distributed as Motorola_Moto_E3_Power_XT1706_MT6735M_S135_161108_6.0.1.zip with a download size of 840 MB. It is built for the MediaTek MT6735M chipset and runs Android 6.0 (Marshmallow). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 25 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
840 MB
Download Free

About Motorola Moto E3 Power XT1706

If your Motorola Moto E3 Power XT1706 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Motorola flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Motorola_Moto_E3_Power_XT1706_MT6735M_S135_161108_6.0.1.zip File Size: 840 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Motorola Moto E3 Power XT1706 should run like a brand new unit.

File Details

File nameMotorola Moto E3 Power XT1706
PackageMotorola_Moto_E3_Power_XT1706_MT6735M_S135_161108_6.0.1.zip
Brand / PlatformMotorola
CategoryMotorola
ChipsetMediaTek MT6735M
Android versionAndroid 6.0 (Marshmallow)
Flash toolSP Flash Tool
Package formatZIP archive
File size840 MB
Date addedJune 16, 2026
PriceFree

How to flash Motorola Moto E3 Power XT1706 with SP Flash Tool

  1. Confirm Motorola Moto E3 Power XT1706 matches your exact device model and that the phone uses the MT6735M chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (840 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Motorola Moto E3 Power XT1706 free to download?

Yes, Motorola Moto E3 Power XT1706 can be downloaded free of charge from this page.

How large is the download?

The Motorola Moto E3 Power XT1706 package is 840 MB.

Which tool do I need to flash Motorola Moto E3 Power XT1706?

Motorola Moto E3 Power XT1706 is MediaTek MT6735M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Motorola Moto E3 Power XT1706?

This firmware is Android 6.0 (Marshmallow).

Which devices is this firmware for?

This file is intended for Motorola devices. Always confirm it matches your specific model before flashing.

More Motorola files

Back to Motorola