Micromax MM-MID8813
Micromax MM-MID8813 is a Micromax firmware file listed under Micromax, distributed as Micromax_MID8813_MT6572_280116_4.4.2.zip.zip with a download size of 475 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4 (KitKat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax MM-MID8813
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Micromax MM-MID8813 owners, this page hosts the original Micromax stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Micromax MM-MID8813 back to square one. File Name: Micromax_MID8813_MT6572_280116_4.4.2.zip.zip File Size: 475 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Micromax MM-MID8813 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Micromax MM-MID8813 |
|---|---|
| Package | Micromax_MID8813_MT6572_280116_4.4.2.zip.zip |
| Brand / Platform | Micromax |
| Category | Micromax |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.4 (KitKat) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 475 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax MM-MID8813 with SP Flash Tool
- Confirm Micromax MM-MID8813 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (475 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Micromax MM-MID8813 free to download?
Yes, Micromax MM-MID8813 can be downloaded free of charge from this page.
How large is the download?
The Micromax MM-MID8813 package is 475 MB.
Which tool do I need to flash Micromax MM-MID8813?
Micromax MM-MID8813 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Micromax MM-MID8813?
This firmware is Android 4.4 (KitKat).
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.