Micromax iOne Note N8305
Micromax iOne Note N8305 is a Micromax firmware file listed under Micromax, distributed as Micromax_iOne_Note_N8305_SW_V12_HW_V2.0_20191001_SPD.zip.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of October 01, 2019. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax iOne Note N8305
If your Micromax iOne Note N8305 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Micromax flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Micromax iOne Note N8305 to factory condition. File Name: Micromax_iOne_Note_N8305_SW_V12_HW_V2.0_20191001_SPD.zip.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Micromax iOne Note N8305 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Micromax iOne Note N8305 |
|---|---|
| Package | Micromax_iOne_Note_N8305_SW_V12_HW_V2.0_20191001_SPD.zip.zip |
| Brand / Platform | Micromax |
| Category | Micromax |
| Platform | Unisoc (Spreadtrum) |
| Build date | October 01, 2019 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax iOne Note N8305 with SPD ResearchDownload
- Confirm Micromax iOne Note N8305 matches your exact device model and that it is intended for Micromax hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Micromax iOne Note N8305 free to download?
Yes, Micromax iOne Note N8305 can be downloaded free of charge from this page.
How large is the download?
The Micromax iOne Note N8305 package is 1 GB.
Which tool do I need to flash Micromax iOne Note N8305?
Micromax iOne Note N8305 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.