Micromax Infinity N12
Micromax Infinity N12 is a Micromax firmware file listed under Micromax, distributed as Micromax_Infinity_N12_MT6765_SW_V07_HW_V3.0_20181229.zip with a download size of 1.5 GB. It is built for the MediaTek MT6765 chipset, with a firmware build date of December 29, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax Infinity N12
The Micromax Infinity N12 runs on Micromax's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Micromax Infinity N12 a fresh start without the clutter that builds up over time. File Name: Micromax_Infinity_N12_MT6765_SW_V07_HW_V3.0_20181229.zip File Size: 1.5 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Micromax Infinity N12 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Micromax Infinity N12 |
|---|---|
| Package | Micromax_Infinity_N12_MT6765_SW_V07_HW_V3.0_20181229.zip |
| Brand / Platform | Micromax |
| Category | Micromax |
| Chipset | MediaTek MT6765 |
| Build date | December 29, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.5 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax Infinity N12 with SP Flash Tool
- Confirm Micromax Infinity N12 matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.5 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Micromax Infinity N12 free to download?
Yes, Micromax Infinity N12 can be downloaded free of charge from this page.
How large is the download?
The Micromax Infinity N12 package is 1.5 GB.
Which tool do I need to flash Micromax Infinity N12?
Micromax Infinity N12 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.