Micromax C2A Plus
Micromax C2A Plus is a Micromax firmware file listed under Micromax, distributed as Micromax_C2A_Plus_MT6737T_08022018_7.0.zip with a download size of 1010 MB. It is built for the MediaTek MT6737T chipset and runs Android 7.0 (Nougat), with a firmware build date of February 08, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Micromax C2A Plus
If your Micromax C2A Plus has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Micromax flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Micromax C2A Plus to factory condition. File Name: Micromax_C2A_Plus_MT6737T_08022018_7.0.zip File Size: 1010 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Micromax C2A Plus should run like a brand new unit.
File Details
| File name | Micromax C2A Plus |
|---|---|
| Package | Micromax_C2A_Plus_MT6737T_08022018_7.0.zip |
| Brand / Platform | Micromax |
| Category | Micromax |
| Chipset | MediaTek MT6737T |
| Android version | Android 7.0 (Nougat) |
| Build date | February 08, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1010 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Micromax C2A Plus with SP Flash Tool
- Confirm Micromax C2A Plus matches your exact device model and that the phone uses the MT6737T chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1010 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Micromax C2A Plus free to download?
Yes, Micromax C2A Plus can be downloaded free of charge from this page.
How large is the download?
The Micromax C2A Plus package is 1010 MB.
Which tool do I need to flash Micromax C2A Plus?
Micromax C2A Plus is MediaTek MT6737T firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Micromax C2A Plus?
This firmware is Android 7.0 (Nougat), built on February 08, 2018.
Which devices is this firmware for?
This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.