Micromax

Micromax A26

Micromax_A26_Foreign_V2.0.5_30032013_SPD.zip
April 28, 2026 Micromax 146 MB Micromax

Micromax A26 is a Micromax firmware file listed under Micromax, distributed as Micromax_A26_Foreign_V2.0.5_30032013_SPD.zip with a download size of 146 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of March 30, 2013. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 24 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
146 MB
Download Free

About Micromax A26

Micromax A26 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Micromax_A26_Foreign_V2.0.5_30032013_SPD.zip File Size: 146 MB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial (Mediafire)

File Details

File nameMicromax A26
PackageMicromax_A26_Foreign_V2.0.5_30032013_SPD.zip
Brand / PlatformMicromax
CategoryMicromax
PlatformUnisoc (Spreadtrum)
Build dateMarch 30, 2013
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size146 MB
Date addedApril 28, 2026
PriceFree

How to flash Micromax A26 with SPD ResearchDownload

  1. Confirm Micromax A26 matches your exact device model and that it is intended for Micromax hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (146 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Micromax A26 free to download?

Yes, Micromax A26 can be downloaded free of charge from this page.

How large is the download?

The Micromax A26 package is 146 MB.

Which tool do I need to flash Micromax A26?

Micromax A26 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Micromax devices. Always confirm it matches your specific model before flashing.

More Micromax files

Back to Micromax