Maxx T106
Maxx T106 is a Maxx firmware file listed under Maxx, distributed as Maxx_T106_SC6531E_MIRA.zip with a download size of 3 MB. It is built for the Unisoc (Spreadtrum) SC6531E chipset. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Maxx T106
Maxx T106 Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Maxx_T106_SC6531E_MIRA.zip File Size: 3 MB Flash Tool: Miracle Tool How to Flash (install): Use Miracle Box Software to Flash or install the firmware. (Mediafire)
File Details
| File name | Maxx T106 |
|---|---|
| Package | Maxx_T106_SC6531E_MIRA.zip |
| Brand / Platform | Maxx |
| Category | Maxx |
| Chipset | Unisoc (Spreadtrum) SC6531E |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 3 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Maxx T106 with SPD ResearchDownload
- Confirm Maxx T106 matches your exact device model and that the phone uses the SC6531E chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- SC6531E Firmware: Flashing Tools and Safety GuideThe SC6531E is a chipset from the Unisoc (Spreadtrum) platform used in various feature phones. To reflash or unbrick a device using this chipset, you will need the specific .pac firmware file for…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Maxx T106 free to download?
Yes, Maxx T106 can be downloaded free of charge from this page.
How large is the download?
The Maxx T106 package is 3 MB.
Which tool do I need to flash Maxx T106?
Maxx T106 is Unisoc (Spreadtrum) SC6531E firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Maxx devices. Always confirm it matches your specific model before flashing.