Lenovo Volte IPH1
Lenovo Volte IPH1 is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_Volte_IPH1_MT6735_V9_281216_5.1.zip with a download size of 1.12 GB. It is built for the MediaTek MT6735 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo Volte IPH1
The Lenovo Volte IPH1 runs on Lenovo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lenovo Volte IPH1 a fresh start without the clutter that builds up over time. File Name: Lenovo_Volte_IPH1_MT6735_V9_281216_5.1.zip File Size: 1.12 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Lenovo Volte IPH1 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Lenovo Volte IPH1 |
|---|---|
| Package | Lenovo_Volte_IPH1_MT6735_V9_281216_5.1.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6735 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.12 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo Volte IPH1 with SP Flash Tool
- Confirm Lenovo Volte IPH1 matches your exact device model and that the phone uses the MT6735 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.12 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Lenovo Volte IPH1 free to download?
Yes, Lenovo Volte IPH1 can be downloaded free of charge from this page.
How large is the download?
The Lenovo Volte IPH1 package is 1.12 GB.
Which tool do I need to flash Lenovo Volte IPH1?
Lenovo Volte IPH1 is MediaTek MT6735 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Lenovo Volte IPH1?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.