Lenovo Tab M10 TB-X606F
Lenovo Tab M10 TB-X606F is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_Tab_M10_TB-X606F_MT6765_S100015_191127.zip with a download size of 2 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo Tab M10 TB-X606F
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Lenovo Tab M10 TB-X606F owners, this page hosts the original Lenovo stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lenovo_Tab_M10_TB-X606F_MT6765_S100015_191127.zip File Size: 2 GB Back up your files, charge the Lenovo Tab M10 TB-X606F past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Lenovo Tab M10 TB-X606F returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Lenovo Tab M10 TB-X606F |
|---|---|
| Package | Lenovo_Tab_M10_TB-X606F_MT6765_S100015_191127.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6765 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo Tab M10 TB-X606F with SP Flash Tool
- Confirm Lenovo Tab M10 TB-X606F matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Lenovo Tab M10 TB-X606F free to download?
Yes, Lenovo Tab M10 TB-X606F can be downloaded free of charge from this page.
How large is the download?
The Lenovo Tab M10 TB-X606F package is 2 GB.
Which tool do I need to flash Lenovo Tab M10 TB-X606F?
Lenovo Tab M10 TB-X606F is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.