Lenovo Tab 3 7 TB3-730F
Lenovo Tab 3 7 TB3-730F is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_Tab_3_7_TB3-730F_MT6735M_HW71_S050_180910.zip with a download size of 1020 MB. It is built for the MediaTek MT6735M chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 3 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo Tab 3 7 TB3-730F
The Lenovo Tab 3 7 TB3-730F runs on Lenovo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Lenovo Tab 3 7 TB3-730F back to square one. File Name: Lenovo_Tab_3_7_TB3-730F_MT6735M_HW71_S050_180910.zip File Size: 1020 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Lenovo Tab 3 7 TB3-730F returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Lenovo Tab 3 7 TB3-730F |
|---|---|
| Package | Lenovo_Tab_3_7_TB3-730F_MT6735M_HW71_S050_180910.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6735M |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1020 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo Tab 3 7 TB3-730F with SP Flash Tool
- Confirm Lenovo Tab 3 7 TB3-730F matches your exact device model and that the phone uses the MT6735M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1020 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Lenovo Tab 3 7 TB3-730F free to download?
Yes, Lenovo Tab 3 7 TB3-730F can be downloaded free of charge from this page.
How large is the download?
The Lenovo Tab 3 7 TB3-730F package is 1020 MB.
Which tool do I need to flash Lenovo Tab 3 7 TB3-730F?
Lenovo Tab 3 7 TB3-730F is MediaTek MT6735M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.