Lenovo K8 Plus XT1902-2
Lenovo K8 Plus XT1902-2 is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_K8_Plus_XT1902-2_MT6757_Marino_28092017_7.1.1.zip with a download size of 2 GB. It is built for the MediaTek MT6757 chipset and runs Android 7.1 (Nougat), with a firmware build date of September 28, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo K8 Plus XT1902-2
The Lenovo K8 Plus XT1902-2 runs on Lenovo's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lenovo K8 Plus XT1902-2 a fresh start without the clutter that builds up over time. File Name: Lenovo_K8_Plus_XT1902-2_MT6757_Marino_28092017_7.1.1.zip File Size: 2 GB Back up your files, charge the Lenovo K8 Plus XT1902-2 past 50 percent, install the matching drivers, and only then begin. When it finishes, the Lenovo K8 Plus XT1902-2 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Lenovo K8 Plus XT1902-2 |
|---|---|
| Package | Lenovo_K8_Plus_XT1902-2_MT6757_Marino_28092017_7.1.1.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6757 |
| Android version | Android 7.1 (Nougat) |
| Build date | September 28, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo K8 Plus XT1902-2 with SP Flash Tool
- Confirm Lenovo K8 Plus XT1902-2 matches your exact device model and that the phone uses the MT6757 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Lenovo K8 Plus XT1902-2 free to download?
Yes, Lenovo K8 Plus XT1902-2 can be downloaded free of charge from this page.
How large is the download?
The Lenovo K8 Plus XT1902-2 package is 2 GB.
Which tool do I need to flash Lenovo K8 Plus XT1902-2?
Lenovo K8 Plus XT1902-2 is MediaTek MT6757 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Lenovo K8 Plus XT1902-2?
This firmware is Android 7.1 (Nougat), built on September 28, 2017.
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.