Lenovo K3 Note K50-T3S
Lenovo K3 Note K50-T3S is a Lenovo firmware file listed under Lenovo, distributed as Lenovo_K3_Note_K50-T3S_MT6752_160122_5.1.zip with a download size of 1 GB. It is built for the MediaTek MT6752 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lenovo K3 Note K50-T3S
If your Lenovo K3 Note K50-T3S has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lenovo flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lenovo K3 Note K50-T3S to factory condition. File Name: Lenovo_K3_Note_K50-T3S_MT6752_160122_5.1.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Lenovo K3 Note K50-T3S should run like a brand new unit.
File Details
| File name | Lenovo K3 Note K50-T3S |
|---|---|
| Package | Lenovo_K3_Note_K50-T3S_MT6752_160122_5.1.zip |
| Brand / Platform | Lenovo |
| Category | Lenovo |
| Chipset | MediaTek MT6752 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lenovo K3 Note K50-T3S with SP Flash Tool
- Confirm Lenovo K3 Note K50-T3S matches your exact device model and that the phone uses the MT6752 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Lenovo K3 Note K50-T3S free to download?
Yes, Lenovo K3 Note K50-T3S can be downloaded free of charge from this page.
How large is the download?
The Lenovo K3 Note K50-T3S package is 1 GB.
Which tool do I need to flash Lenovo K3 Note K50-T3S?
Lenovo K3 Note K50-T3S is MediaTek MT6752 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Lenovo K3 Note K50-T3S?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Lenovo devices. Always confirm it matches your specific model before flashing.