# Lava Z2S LZG401

> Lava Z2S LZG401 is a Lava firmware file listed under Lava, distributed as Lava_Z2S_LZG401_MT6765_SW_V06_HW_V1.0_210721.zip with a download size of 1.39 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/lava-z2s-lzg401-104585>

## File details

- **File name:** Lava Z2S LZG401
- **Package:** Lava_Z2S_LZG401_MT6765_SW_V06_HW_V1.0_210721.zip
- **Brand / platform:** Lava
- **Category:** [Lava](https://www.filefirmware.com/category/lava)
- **Chipset:** MediaTek MT6765
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 1.39 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/lava-z2s-lzg401-104585>

## About Lava Z2S LZG401

Looking for the official stock firmware for your Lava Z2S LZG401? You're in the right place. Below is the original Lava flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lava Z2S LZG401 to factory condition. File Name: Lava_Z2S_LZG401_MT6765_SW_V06_HW_V1.0_210721.zip File Size: 1.39 GB Back up your files, charge the Lava Z2S LZG401 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Lava Z2S LZG401 should run like a brand new unit.

## How to flash Lava Z2S LZG401 with SP Flash Tool

1. Confirm Lava Z2S LZG401 matches your exact device model and that the phone uses the MT6765 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (1.39 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6765 Firmware Guide: Tools and Flashing Instructions](https://www.filefirmware.com/blog/mt6765-firmware-guide-tools-and-flashing-instructions): The MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Lava Z2S LZG401 free to download?

Yes, Lava Z2S LZG401 can be downloaded free of charge from its web page.

### How large is the download?

The Lava Z2S LZG401 package is 1.39 GB.

### Which tool do I need to flash Lava Z2S LZG401?

Lava Z2S LZG401 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

## More Lava files

- [Lava Z3 LZG403](https://www.filefirmware.com/file/lava-z3-lzg403-104700) — 1.96 GB
- [Lava Z93P](https://www.filefirmware.com/file/lava-z93p-104619) — 1.59 GB
- [Lava Z93](https://www.filefirmware.com/file/lava-z93-104613) — 2 GB
- [Lava Z7H Plus](https://www.filefirmware.com/file/lava-z7h-plus-104612) — 286 MB
- [Lava Z71](https://www.filefirmware.com/file/lava-z71-104607) — 3 GB
- [Lava Z7H](https://www.filefirmware.com/file/lava-z7h-104604) — 271 MB
- [Lava Z7G](https://www.filefirmware.com/file/lava-z7g-104602) — 377 MB
- [Lava Z66](https://www.filefirmware.com/file/lava-z66-104600) — 1.6 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/lava-z2s-lzg401-104585>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
