Konka P3 Stock Firmware
Konka P3 Stock Firmware is a Konka firmware file listed under Konka, distributed as Konka_P3_MT6732_20150724_4.4.4_OTA.zip with a download size of 645 MB. It was published on June 16, 2026. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Konka P3 Stock Firmware
Here you will find all the latest Konka firmware for Konka P3. If you are looking for Konka P3 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Konka P3, if it is not, then flashing the below stock firmware can brick your device. The Konka P3 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Konka P3 Firmware File Name : Konka_P3_MT6732_20150724_4.4.4_OTA.zip File Size : 645 MB Get Firmware Also: Konka S9 Stock Firmware How To Flash Konka P3 Stock Firmware Step 1 : Download the Konka P3 firmware package on your computer. Step 2 : Transfer the firmware to your phone. Step 3 : Power off your phone and boot into Recovery Mode. Step 4 : Install/flash the firmware package from Recovery. Step 6 : Reboot your phone. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Konka P3 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Konka P3 Stock Firmware |
|---|---|
| Package | Konka_P3_MT6732_20150724_4.4.4_OTA.zip |
| Brand / Platform | Konka |
| Category | Konka |
| File size | 645 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm Konka P3 Stock Firmware matches your exact device model and that it is intended for Konka hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (645 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is Konka P3 Stock Firmware free to download?
Yes, Konka P3 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Konka P3 Stock Firmware package is 645 MB.
Which devices is this firmware for?
This file is intended for Konka devices. Always confirm it matches your specific model before flashing.