Invens City X3 Stock Firmware
Invens City X3 Stock Firmware is a Invens firmware file listed under Invens, distributed as Invens_City_X3_MT6580_20161214_5.1.zip with a download size of 896 MB. It was published on June 16, 2026. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Invens City X3 Stock Firmware
Here you will find all the latest Invens firmware for Invens City X3. If you are looking for Invens City X3 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Invens City X3, if it is not, then flashing the below stock firmware can brick your device. The Invens City X3 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Invens City X3 Firmware File Name : Invens_City_X3_MT6580_20161214_5.1.zip File Size : 896 MB Get Firmware File Name : Invens_City_X3_MT6580_20170626_6.0.zip File Size : 975 MB Get Firmware Also: Invens Knight Stock Firmware How To Flash Invens City X3 Stock Firmware Download and extract the Invens City X3 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Invens City X3 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Invens City X3 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Invens City X3 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Invens City X3 Stock Firmware |
|---|---|
| Package | Invens_City_X3_MT6580_20161214_5.1.zip |
| Brand / Platform | Invens |
| Category | Invens |
| File size | 896 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm Invens City X3 Stock Firmware matches your exact device model and that it is intended for Invens hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (896 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is Invens City X3 Stock Firmware free to download?
Yes, Invens City X3 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Invens City X3 Stock Firmware package is 896 MB.
Which devices is this firmware for?
This file is intended for Invens devices. Always confirm it matches your specific model before flashing.