# Intex Elyt E8 Plus Stock Firmware

> Intex Elyt E8 Plus Stock Firmware is an Intex firmware file listed under Intex, distributed as Intex_Elyt_E8_Plus_MT6580_20180111_5.1.zip with a download size of 481 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1, with a firmware build date of January 11, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/intex-elyt-e8-plus-stock-firmware-70895>

## File details

- **File name:** Intex Elyt E8 Plus Stock Firmware
- **Package:** Intex_Elyt_E8_Plus_MT6580_20180111_5.1.zip
- **Brand / platform:** Intex
- **Category:** [Intex](https://www.filefirmware.com/category/intex)
- **Chipset:** MediaTek MT6580
- **Android version:** Android 5.1 (Lollipop)
- **Build date:** January 11, 2018
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 481 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/intex-elyt-e8-plus-stock-firmware-70895>

## About Intex Elyt E8 Plus Stock Firmware

Here you will find all the latest Intex firmware for Intex Elyt E8 Plus. If you are looking for Intex Elyt E8 Plus stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Intex Elyt E8 Plus, if it is not, then flashing the below stock firmware can brick your device. The Intex Elyt E8 Plus firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Intex Elyt E8 Plus Firmware File Name : Intex_Elyt_E8_Plus_MT6580_20180111_5.1.zip File Size : 481 MB Android OS Version : 5.1 Get Firmware Also: Intex Elyt E5 Stock Firmware How To Flash Intex Elyt E8 Plus Stock Firmware Download and extract the Intex Elyt E8 Plus firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Intex Elyt E8 Plus firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Intex Elyt E8 Plus device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Intex Elyt E8 Plus device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

## How to flash Intex Elyt E8 Plus Stock Firmware with SP Flash Tool

1. Confirm Intex Elyt E8 Plus Stock Firmware matches your exact device model and that the phone uses the MT6580 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (481 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6580 Firmware Guide: Flashing Tools and Safety](https://www.filefirmware.com/blog/mt6580-firmware-guide-flashing-tools-and-safety): The MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- [Intex Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/intex-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick an Intex device, you must use a stock ROM that matches your specific model and the corresponding flashing tool for its chipset. Most Intex devices utilize either MediaTek or…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…

## Frequently asked questions

### Is Intex Elyt E8 Plus Stock Firmware free to download?

Yes, Intex Elyt E8 Plus Stock Firmware can be downloaded free of charge from its web page.

### How large is the download?

The Intex Elyt E8 Plus Stock Firmware package is 481 MB.

### Which tool do I need to flash Intex Elyt E8 Plus Stock Firmware?

Intex Elyt E8 Plus Stock Firmware is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Intex Elyt E8 Plus Stock Firmware?

This firmware is Android 5.1 (Lollipop), built on January 11, 2018.

### Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

## More Intex files

- [Intex Yuvi LX](https://www.filefirmware.com/file/intex-yuvi-lx-102799) — 7 MB
- [Intex Turbo Xtreme](https://www.filefirmware.com/file/intex-turbo-xtreme-102755) — 16 MB
- [Intex Turbo i14](https://www.filefirmware.com/file/intex-turbo-i14-102751) — 4 MB
- [Intex Turbo Duoz](https://www.filefirmware.com/file/intex-turbo-duoz-102750) — 4 MB
- [Intex Lions 6](https://www.filefirmware.com/file/intex-lions-6-102723) — 763 MB
- [Intex Infie 33](https://www.filefirmware.com/file/intex-infie-33-102713) — 2 GB
- [Intex IP041BND](https://www.filefirmware.com/file/intex-ip041bnd-102711) — 1 GB
- [Intex Fulvu E5](https://www.filefirmware.com/file/intex-fulvu-e5-102686) — 2 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/intex-elyt-e8-plus-stock-firmware-70895>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
