# Intex Crystal 701 Stock Firmware

> Intex Crystal 701 Stock Firmware is an Intex firmware file listed under Intex, distributed as Intex_Crystal_701_V03_India_24092014_SPD.zip with a download size of 7 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of September 24, 2014. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/intex-crystal-701-stock-firmware-70868>

## File details

- **File name:** Intex Crystal 701 Stock Firmware
- **Package:** Intex_Crystal_701_V03_India_24092014_SPD.zip
- **Brand / platform:** Intex
- **Category:** [Intex](https://www.filefirmware.com/category/intex)
- **Platform:** Unisoc (Spreadtrum)
- **Build date:** September 24, 2014
- **Flash tool:** SPD ResearchDownload (or UpgradeDownload)
- **Package format:** ZIP archive
- **File size:** 7 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/intex-crystal-701-stock-firmware-70868>

## About Intex Crystal 701 Stock Firmware

Here you will find all the latest Intex firmware for Intex Crystal 701. If you are looking for Intex Crystal 701 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Intex Crystal 701, if it is not, then flashing the below stock firmware can brick your device. The Intex Crystal 701 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Intex Crystal 701 Firmware File Name : Intex_Crystal_701_V03_India_24092014_SPD.zip File Size : 7 MB Country : India Get Firmware Also: Intex Crystal 702 Stock Firmware How To Flash Intex Crystal 701 Stock Firmware Download and extract the Intex Crystal 701 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Intex Crystal 701 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Intex Crystal 701 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Intex Crystal 701 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

## How to flash Intex Crystal 701 Stock Firmware with SPD ResearchDownload

1. Confirm Intex Crystal 701 Stock Firmware matches your exact device model and that it is intended for Intex hardware.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (7 MB) from the web page and extract it on a Windows PC.
4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
5. In the tool, load the .pac firmware file from the extracted folder.
6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

## Guides for this firmware

- [Intex Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/intex-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick an Intex device, you must use a stock ROM that matches your specific model and the corresponding flashing tool for its chipset. Most Intex devices utilize either MediaTek or…
- [Connecting Unisoc Phones to SPD ResearchDownload](https://www.filefirmware.com/blog/connecting-unisoc-phones-to-spd-researchdownload): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- [Flashing .pac Files with SPD ResearchDownload Guide](https://www.filefirmware.com/blog/flashing-pac-files-with-spd-researchdownload-guide): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…

## Frequently asked questions

### Is Intex Crystal 701 Stock Firmware free to download?

Yes, Intex Crystal 701 Stock Firmware can be downloaded free of charge from its web page.

### How large is the download?

The Intex Crystal 701 Stock Firmware package is 7 MB.

### Which tool do I need to flash Intex Crystal 701 Stock Firmware?

Intex Crystal 701 Stock Firmware is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

### Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

## More Intex files

- [Intex Yuvi LX](https://www.filefirmware.com/file/intex-yuvi-lx-102799) — 7 MB
- [Intex Turbo Xtreme](https://www.filefirmware.com/file/intex-turbo-xtreme-102755) — 16 MB
- [Intex Turbo i14](https://www.filefirmware.com/file/intex-turbo-i14-102751) — 4 MB
- [Intex Turbo Duoz](https://www.filefirmware.com/file/intex-turbo-duoz-102750) — 4 MB
- [Intex Lions 6](https://www.filefirmware.com/file/intex-lions-6-102723) — 763 MB
- [Intex Infie 33](https://www.filefirmware.com/file/intex-infie-33-102713) — 2 GB
- [Intex IP041BND](https://www.filefirmware.com/file/intex-ip041bnd-102711) — 1 GB
- [Intex Fulvu E5](https://www.filefirmware.com/file/intex-fulvu-e5-102686) — 2 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/intex-crystal-701-stock-firmware-70868>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
