# Intex Cloud 3G Gem

> Intex Cloud 3G Gem is an Intex firmware file listed under Intex, distributed as Intex_Cloud_3G_Gem_V03_Indian_SER_20150804_SPD.zip with a download size of 304 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of August 04, 2015. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/intex-cloud-3g-gem-102579>

## File details

- **File name:** Intex Cloud 3G Gem
- **Package:** Intex_Cloud_3G_Gem_V03_Indian_SER_20150804_SPD.zip
- **Brand / platform:** Intex
- **Category:** [Intex](https://www.filefirmware.com/category/intex)
- **Platform:** Unisoc (Spreadtrum)
- **Build date:** August 04, 2015
- **Flash tool:** SPD ResearchDownload (or UpgradeDownload)
- **Package format:** ZIP archive
- **File size:** 304 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/intex-cloud-3g-gem-102579>

## About Intex Cloud 3G Gem

Looking for the official stock firmware for your Intex Cloud 3G Gem? You're in the right place. Below is the original Intex flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Intex_Cloud_3G_Gem_V03_Indian_SER_20150804_SPD.zip File Size: 304 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Intex Cloud 3G Gem should boot up like new. Use the right file for your exact model and don't interrupt the process.

## How to flash Intex Cloud 3G Gem with SPD ResearchDownload

1. Confirm Intex Cloud 3G Gem matches your exact device model and that it is intended for Intex hardware.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (304 MB) from the web page and extract it on a Windows PC.
4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
5. In the tool, load the .pac firmware file from the extracted folder.
6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

## Guides for this firmware

- [Intex Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/intex-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick an Intex device, you must use a stock ROM that matches your specific model and the corresponding flashing tool for its chipset. Most Intex devices utilize either MediaTek or…
- [Connecting Unisoc Phones to SPD ResearchDownload](https://www.filefirmware.com/blog/connecting-unisoc-phones-to-spd-researchdownload): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- [Flashing .pac Files with SPD ResearchDownload Guide](https://www.filefirmware.com/blog/flashing-pac-files-with-spd-researchdownload-guide): SPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…

## Frequently asked questions

### Is Intex Cloud 3G Gem free to download?

Yes, Intex Cloud 3G Gem can be downloaded free of charge from its web page.

### How large is the download?

The Intex Cloud 3G Gem package is 304 MB.

### Which tool do I need to flash Intex Cloud 3G Gem?

Intex Cloud 3G Gem is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

### Which devices is this firmware for?

This file is intended for Intex devices. Always confirm it matches your specific model before flashing.

## More Intex files

- [Intex Yuvi LX](https://www.filefirmware.com/file/intex-yuvi-lx-102799) — 7 MB
- [Intex Turbo Xtreme](https://www.filefirmware.com/file/intex-turbo-xtreme-102755) — 16 MB
- [Intex Turbo i14](https://www.filefirmware.com/file/intex-turbo-i14-102751) — 4 MB
- [Intex Turbo Duoz](https://www.filefirmware.com/file/intex-turbo-duoz-102750) — 4 MB
- [Intex Lions 6](https://www.filefirmware.com/file/intex-lions-6-102723) — 763 MB
- [Intex Infie 33](https://www.filefirmware.com/file/intex-infie-33-102713) — 2 GB
- [Intex IP041BND](https://www.filefirmware.com/file/intex-ip041bnd-102711) — 1 GB
- [Intex Fulvu E5](https://www.filefirmware.com/file/intex-fulvu-e5-102686) — 2 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/intex-cloud-3g-gem-102579>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
