# Infinix Zero X Neo X6810

> Infinix Zero X Neo X6810 is an Infinix firmware file listed under Infinix, distributed as Infinix_Zero_X_Neo_X6810_MT6785_V638_211130.zip with a download size of 4.40 GB. It is built for the MediaTek MT6785 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/infinix-zero-x-neo-x6810-102140>

## File details

- **File name:** Infinix Zero X Neo X6810
- **Package:** Infinix_Zero_X_Neo_X6810_MT6785_V638_211130.zip
- **Brand / platform:** Infinix
- **Category:** [Infinix](https://www.filefirmware.com/category/infinix)
- **Chipset:** MediaTek MT6785
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 4.40 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/infinix-zero-x-neo-x6810-102140>

## About Infinix Zero X Neo X6810

The Infinix Zero X Neo X6810 runs on Infinix's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Infinix_Zero_X_Neo_X6810_MT6785_V638_211130.zip File Size: 4.40 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Infinix Zero X Neo X6810 should run like a brand new unit.

## How to flash Infinix Zero X Neo X6810 with SP Flash Tool

1. Confirm Infinix Zero X Neo X6810 matches your exact device model and that the phone uses the MT6785 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (4.40 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- [What is a Scatter File? Loading MediaTek Firmware in SP Flash Tool](https://www.filefirmware.com/blog/what-is-a-scatter-file-loading-mediatek-firmware-in-sp-flash-tool): A scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…

## Frequently asked questions

### Is Infinix Zero X Neo X6810 free to download?

Yes, Infinix Zero X Neo X6810 can be downloaded free of charge from its web page.

### How large is the download?

The Infinix Zero X Neo X6810 package is 4.40 GB.

### Which tool do I need to flash Infinix Zero X Neo X6810?

Infinix Zero X Neo X6810 is MediaTek MT6785 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

## More Infinix files

- [Infinix Zero X X6811B](https://www.filefirmware.com/file/infinix-zero-x-x6811b-102130) — 4.54 GB
- [Infinix Zero 5G X6815](https://www.filefirmware.com/file/infinix-zero-5g-x6815-102115) — 4.55 GB
- [Infinix X675](https://www.filefirmware.com/file/infinix-x675-102110) — 2.95 GB
- [Infinix Zero 5G X6815B](https://www.filefirmware.com/file/infinix-zero-5g-x6815b-102109) — 4.55 GB
- [Infinix Zero 5 X603](https://www.filefirmware.com/file/infinix-zero-5-x603-102106) — 2 GB
- [Infinix Zero 4 X555](https://www.filefirmware.com/file/infinix-zero-4-x555-102105) — 2 GB
- [Infinix X627W](https://www.filefirmware.com/file/infinix-x627w-102102) — 1.79 GB
- [Infinix X6512](https://www.filefirmware.com/file/infinix-x6512-102099) — 1.98 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/infinix-zero-x-neo-x6810-102140>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
