Infinix

Infinix Surf Goal X452

Infinix_Surf_Goal_X452_MT6572_AW660_140421.zip
June 16, 2026 Infinix 383 MB Infinix

Infinix Surf Goal X452 is a Infinix firmware file listed under Infinix, distributed as Infinix_Surf_Goal_X452_MT6572_AW660_140421.zip with a download size of 383 MB. It is built for the MediaTek MT6572 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
383 MB
Download Free

About Infinix Surf Goal X452

The Infinix Surf Goal X452 runs on Infinix's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Infinix Surf Goal X452 back to square one. File Name: Infinix_Surf_Goal_X452_MT6572_AW660_140421.zip File Size: 383 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Infinix Surf Goal X452 should run like a brand new unit.

File Details

File nameInfinix Surf Goal X452
PackageInfinix_Surf_Goal_X452_MT6572_AW660_140421.zip
Brand / PlatformInfinix
CategoryInfinix
ChipsetMediaTek MT6572
Flash toolSP Flash Tool
Package formatZIP archive
File size383 MB
Date addedJune 16, 2026
PriceFree

How to flash Infinix Surf Goal X452 with SP Flash Tool

  1. Confirm Infinix Surf Goal X452 matches your exact device model and that the phone uses the MT6572 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (383 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Infinix Surf Goal X452 free to download?

Yes, Infinix Surf Goal X452 can be downloaded free of charge from this page.

How large is the download?

The Infinix Surf Goal X452 package is 383 MB.

Which tool do I need to flash Infinix Surf Goal X452?

Infinix Surf Goal X452 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

More Infinix files

Back to Infinix