# Infinix Smart 5 X657B

> Infinix Smart 5 X657B is an Infinix firmware file listed under Infinix, distributed as Infinix_Smart_5_X657B_MT6761_V022_210421.zip with a download size of 1.52 GB. It is built for the MediaTek MT6761 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/infinix-smart-5-x657b-102048>

## File details

- **File name:** Infinix Smart 5 X657B
- **Package:** Infinix_Smart_5_X657B_MT6761_V022_210421.zip
- **Brand / platform:** Infinix
- **Category:** [Infinix](https://www.filefirmware.com/category/infinix)
- **Chipset:** MediaTek MT6761
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 1.52 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/infinix-smart-5-x657b-102048>

## About Infinix Smart 5 X657B

Looking for the official stock firmware for your Infinix Smart 5 X657B? You're in the right place. Below is the original Infinix flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Infinix Smart 5 X657B a fresh start without the clutter that builds up over time. File Name: Infinix_Smart_5_X657B_MT6761_V022_210421.zip File Size: 1.52 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Infinix Smart 5 X657B should run like a brand new unit.

## How to flash Infinix Smart 5 X657B with SP Flash Tool

1. Confirm Infinix Smart 5 X657B matches your exact device model and that the phone uses the MT6761 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (1.52 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- [What is a Scatter File? Loading MediaTek Firmware in SP Flash Tool](https://www.filefirmware.com/blog/what-is-a-scatter-file-loading-mediatek-firmware-in-sp-flash-tool): A scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…

## Frequently asked questions

### Is Infinix Smart 5 X657B free to download?

Yes, Infinix Smart 5 X657B can be downloaded free of charge from its web page.

### How large is the download?

The Infinix Smart 5 X657B package is 1.52 GB.

### Which tool do I need to flash Infinix Smart 5 X657B?

Infinix Smart 5 X657B is MediaTek MT6761 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

## More Infinix files

- [Infinix Zero X Neo X6810](https://www.filefirmware.com/file/infinix-zero-x-neo-x6810-102140) — 4.40 GB
- [Infinix Zero X X6811B](https://www.filefirmware.com/file/infinix-zero-x-x6811b-102130) — 4.54 GB
- [Infinix Zero 5G X6815](https://www.filefirmware.com/file/infinix-zero-5g-x6815-102115) — 4.55 GB
- [Infinix X675](https://www.filefirmware.com/file/infinix-x675-102110) — 2.95 GB
- [Infinix Zero 5G X6815B](https://www.filefirmware.com/file/infinix-zero-5g-x6815b-102109) — 4.55 GB
- [Infinix Zero 5 X603](https://www.filefirmware.com/file/infinix-zero-5-x603-102106) — 2 GB
- [Infinix Zero 4 X555](https://www.filefirmware.com/file/infinix-zero-4-x555-102105) — 2 GB
- [Infinix X627W](https://www.filefirmware.com/file/infinix-x627w-102102) — 1.79 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/infinix-smart-5-x657b-102048>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
