Infinix

Infinix Smart 3 X5516B

Infinix_Smart_3_X5516B_MT6761_V215_190509.zip
June 16, 2026 Infinix 1 GB Infinix

Infinix Smart 3 X5516B is a Infinix firmware file listed under Infinix, distributed as Infinix_Smart_3_X5516B_MT6761_V215_190509.zip with a download size of 1 GB. It is built for the MediaTek MT6761 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Infinix Smart 3 X5516B

The Infinix Smart 3 X5516B runs on Infinix's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Infinix Smart 3 X5516B back to square one. File Name: Infinix_Smart_3_X5516B_MT6761_V215_190509.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Infinix Smart 3 X5516B returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameInfinix Smart 3 X5516B
PackageInfinix_Smart_3_X5516B_MT6761_V215_190509.zip
Brand / PlatformInfinix
CategoryInfinix
ChipsetMediaTek MT6761
Flash toolSP Flash Tool
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Infinix Smart 3 X5516B with SP Flash Tool

  1. Confirm Infinix Smart 3 X5516B matches your exact device model and that the phone uses the MT6761 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Infinix Smart 3 X5516B free to download?

Yes, Infinix Smart 3 X5516B can be downloaded free of charge from this page.

How large is the download?

The Infinix Smart 3 X5516B package is 1 GB.

Which tool do I need to flash Infinix Smart 3 X5516B?

Infinix Smart 3 X5516B is MediaTek MT6761 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

More Infinix files

Back to Infinix