Infinix Smart 2 X5515F
Infinix Smart 2 X5515F is a Infinix firmware file listed under Infinix, distributed as Infinix_Smart_2_X5515F_MT6739_V143_180725.zip with a download size of 416 MB. It is built for the MediaTek MT6739 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Smart 2 X5515F
The Infinix Smart 2 X5515F runs on Infinix's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Infinix Smart 2 X5515F back to square one. File Name: Infinix_Smart_2_X5515F_MT6739_V143_180725.zip File Size: 416 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Infinix Smart 2 X5515F should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Infinix Smart 2 X5515F |
|---|---|
| Package | Infinix_Smart_2_X5515F_MT6739_V143_180725.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6739 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 416 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Smart 2 X5515F with SP Flash Tool
- Confirm Infinix Smart 2 X5515F matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (416 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Infinix Smart 2 X5515F free to download?
Yes, Infinix Smart 2 X5515F can be downloaded free of charge from this page.
How large is the download?
The Infinix Smart 2 X5515F package is 416 MB.
Which tool do I need to flash Infinix Smart 2 X5515F?
Infinix Smart 2 X5515F is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.