Infinix Race Eagle X500
Infinix Race Eagle X500 is a Infinix firmware file listed under Infinix, distributed as Infinix_Race_Eagle_X500_MT6577_S9081_130625.zip with a download size of 351 MB. It is built for the MediaTek MT6577 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Race Eagle X500
If your Infinix Race Eagle X500 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Infinix flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Infinix Race Eagle X500 to factory condition. File Name: Infinix_Race_Eagle_X500_MT6577_S9081_130625.zip File Size: 351 MB Back up your files, charge the Infinix Race Eagle X500 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Infinix Race Eagle X500 should run like a brand new unit.
File Details
| File name | Infinix Race Eagle X500 |
|---|---|
| Package | Infinix_Race_Eagle_X500_MT6577_S9081_130625.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6577 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 351 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Race Eagle X500 with SP Flash Tool
- Confirm Infinix Race Eagle X500 matches your exact device model and that the phone uses the MT6577 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (351 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Infinix Race Eagle X500 free to download?
Yes, Infinix Race Eagle X500 can be downloaded free of charge from this page.
How large is the download?
The Infinix Race Eagle X500 package is 351 MB.
Which tool do I need to flash Infinix Race Eagle X500?
Infinix Race Eagle X500 is MediaTek MT6577 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.