Infinix Note 7 X690C
Infinix Note 7 X690C is a Infinix firmware file listed under Infinix, distributed as Infinix_Note_7_X690C_MT6768_V105_200522.zip with a download size of 2.00 GB. It is built for the MediaTek MT6768 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Note 7 X690C
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Infinix Note 7 X690C owners, this page hosts the original Infinix stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Infinix Note 7 X690C a fresh start without the clutter that builds up over time. File Name: Infinix_Note_7_X690C_MT6768_V105_200522.zip File Size: 2.00 GB Back up your files, charge the Infinix Note 7 X690C past 50 percent, install the matching drivers, and only then begin. When it finishes, the Infinix Note 7 X690C restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Infinix Note 7 X690C |
|---|---|
| Package | Infinix_Note_7_X690C_MT6768_V105_200522.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6768 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2.00 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Note 7 X690C with SP Flash Tool
- Confirm Infinix Note 7 X690C matches your exact device model and that the phone uses the MT6768 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2.00 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Infinix Note 7 X690C free to download?
Yes, Infinix Note 7 X690C can be downloaded free of charge from this page.
How large is the download?
The Infinix Note 7 X690C package is 2.00 GB.
Which tool do I need to flash Infinix Note 7 X690C?
Infinix Note 7 X690C is MediaTek MT6768 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.