Infinix

Infinix Note 4 X572

Infinix_Note_4_X572_MT6753_V19_180302.zip
June 16, 2026 Infinix 2.00 GB Infinix

Infinix Note 4 X572 is a Infinix firmware file listed under Infinix, distributed as Infinix_Note_4_X572_MT6753_V19_180302.zip with a download size of 2.00 GB. It is built for the MediaTek MT6753 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2.00 GB
Download Free

About Infinix Note 4 X572

The Infinix Note 4 X572 runs on Infinix's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Infinix_Note_4_X572_MT6753_V19_180302.zip File Size: 2.00 GB Back up your files, charge the Infinix Note 4 X572 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Infinix Note 4 X572 should run like a brand new unit.

File Details

File nameInfinix Note 4 X572
PackageInfinix_Note_4_X572_MT6753_V19_180302.zip
Brand / PlatformInfinix
CategoryInfinix
ChipsetMediaTek MT6753
Flash toolSP Flash Tool
Package formatZIP archive
File size2.00 GB
Date addedJune 16, 2026
PriceFree

How to flash Infinix Note 4 X572 with SP Flash Tool

  1. Confirm Infinix Note 4 X572 matches your exact device model and that the phone uses the MT6753 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2.00 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Infinix Note 4 X572 free to download?

Yes, Infinix Note 4 X572 can be downloaded free of charge from this page.

How large is the download?

The Infinix Note 4 X572 package is 2.00 GB.

Which tool do I need to flash Infinix Note 4 X572?

Infinix Note 4 X572 is MediaTek MT6753 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

More Infinix files

Back to Infinix