Infinix Hot S3 X573S
Infinix Hot S3 X573S is a Infinix firmware file listed under Infinix, distributed as Infinix_Hot_S3_X573S_V5_180530_QPST.zip with a download size of 2.00 GB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Hot S3 X573S
Looking for the official stock firmware for your Infinix Hot S3 X573S? You're in the right place. Below is the original Infinix flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Infinix_Hot_S3_X573S_V5_180530_QPST.zip File Size: 2.00 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Infinix Hot S3 X573S should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Infinix Hot S3 X573S |
|---|---|
| Package | Infinix_Hot_S3_X573S_V5_180530_QPST.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Platform | Qualcomm |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 2.00 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Hot S3 X573S with QFIL
- Confirm Infinix Hot S3 X573S matches your exact device model and that it is intended for Infinix hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2.00 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is Infinix Hot S3 X573S free to download?
Yes, Infinix Hot S3 X573S can be downloaded free of charge from this page.
How large is the download?
The Infinix Hot S3 X573S package is 2.00 GB.
Which tool do I need to flash Infinix Hot S3 X573S?
Infinix Hot S3 X573S is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.