# Infinix Hot S3 X573 Stock Firmware

> Infinix Hot S3 X573 Stock Firmware is an Infinix firmware file listed under Infinix, distributed as Infinix_Hot_S3_X573_05012018_QFIL.zip with a download size of 2 GB. It is built for Qualcomm-based devices, with a firmware build date of January 05, 2018. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/infinix-hot-s3-x573-stock-firmware-75547>

## File details

- **File name:** Infinix Hot S3 X573 Stock Firmware
- **Package:** Infinix_Hot_S3_X573_05012018_QFIL.zip
- **Brand / platform:** Infinix
- **Category:** [Infinix](https://www.filefirmware.com/category/infinix)
- **Platform:** Qualcomm
- **Build date:** January 05, 2018
- **Flash tool:** QFIL (part of Qualcomm QPST)
- **Package format:** ZIP archive
- **File size:** 2 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/infinix-hot-s3-x573-stock-firmware-75547>

## About Infinix Hot S3 X573 Stock Firmware

Here you will find all the latest Infinix firmware for Infinix Hot S3 X573. If you are looking for Infinix Hot S3 X573 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Infinix Hot S3 X573, if it is not, then flashing the below stock firmware can brick your device. The Infinix Hot S3 X573 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Infinix Hot S3 X573 Firmware File Name : Infinix_Hot_S3_X573_05012018_QFIL.zip File Size : 2 GB Get Firmware Also: Infinix Hot 6 X606B Stock Firmware How To Flash Infinix Hot S3 X573 Stock Firmware Download and extract the Infinix Hot S3 X573 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Infinix Hot S3 X573 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Infinix Hot S3 X573 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Infinix Hot S3 X573 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U

## How to flash Infinix Hot S3 X573 Stock Firmware with QFIL

1. Confirm Infinix Hot S3 X573 Stock Firmware matches your exact device model and that it is intended for Infinix hardware.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (2 GB) from the web page and extract it on a Windows PC.
4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

## Guides for this firmware

- [How to Get Qualcomm Phones into EDL Mode for QFIL](https://www.filefirmware.com/blog/how-to-get-qualcomm-phones-into-edl-mode-for-qfil): To get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- [How to Fix QFIL Sahara Fail Error](https://www.filefirmware.com/blog/how-to-fix-qfil-sahara-fail-error): The Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- [How to Use QFIL: Qualcomm Firmware Flashing Guide](https://www.filefirmware.com/blog/how-to-use-qfil-qualcomm-firmware-flashing-guide): QFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…

## Frequently asked questions

### Is Infinix Hot S3 X573 Stock Firmware free to download?

Yes, Infinix Hot S3 X573 Stock Firmware can be downloaded free of charge from its web page.

### How large is the download?

The Infinix Hot S3 X573 Stock Firmware package is 2 GB.

### Which tool do I need to flash Infinix Hot S3 X573 Stock Firmware?

Infinix Hot S3 X573 Stock Firmware is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

### Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

## More Infinix files

- [Infinix Zero X Neo X6810](https://www.filefirmware.com/file/infinix-zero-x-neo-x6810-102140) — 4.40 GB
- [Infinix Zero X X6811B](https://www.filefirmware.com/file/infinix-zero-x-x6811b-102130) — 4.54 GB
- [Infinix Zero 5G X6815](https://www.filefirmware.com/file/infinix-zero-5g-x6815-102115) — 4.55 GB
- [Infinix X675](https://www.filefirmware.com/file/infinix-x675-102110) — 2.95 GB
- [Infinix Zero 5G X6815B](https://www.filefirmware.com/file/infinix-zero-5g-x6815b-102109) — 4.55 GB
- [Infinix Zero 5 X603](https://www.filefirmware.com/file/infinix-zero-5-x603-102106) — 2 GB
- [Infinix Zero 4 X555](https://www.filefirmware.com/file/infinix-zero-4-x555-102105) — 2 GB
- [Infinix X627W](https://www.filefirmware.com/file/infinix-x627w-102102) — 1.79 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/infinix-hot-s3-x573-stock-firmware-75547>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
