Infinix Hot 8 X650D
Infinix Hot 8 X650D is a Infinix firmware file listed under Infinix, distributed as Infinix_Hot_8_X650D_MT6761_V115_191106.zip with a download size of 2.00 GB. It is built for the MediaTek MT6761 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Hot 8 X650D
If your Infinix Hot 8 X650D has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Infinix flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Infinix Hot 8 X650D back to square one. File Name: Infinix_Hot_8_X650D_MT6761_V115_191106.zip File Size: 2.00 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Infinix Hot 8 X650D should run like a brand new unit.
File Details
| File name | Infinix Hot 8 X650D |
|---|---|
| Package | Infinix_Hot_8_X650D_MT6761_V115_191106.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6761 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2.00 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Hot 8 X650D with SP Flash Tool
- Confirm Infinix Hot 8 X650D matches your exact device model and that the phone uses the MT6761 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2.00 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Infinix Hot 8 X650D free to download?
Yes, Infinix Hot 8 X650D can be downloaded free of charge from this page.
How large is the download?
The Infinix Hot 8 X650D package is 2.00 GB.
Which tool do I need to flash Infinix Hot 8 X650D?
Infinix Hot 8 X650D is MediaTek MT6761 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.