Infinix Hot 11 X689F
Infinix Hot 11 X689F is a Infinix firmware file listed under Infinix, distributed as Infinix_Hot_11_X689F_MT6765_V420_211028.zip with a download size of 3.48 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Hot 11 X689F
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Infinix Hot 11 X689F owners, this page hosts the original Infinix stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Infinix_Hot_11_X689F_MT6765_V420_211028.zip File Size: 3.48 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Infinix Hot 11 X689F restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Infinix Hot 11 X689F |
|---|---|
| Package | Infinix_Hot_11_X689F_MT6765_V420_211028.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6765 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 3.48 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Hot 11 X689F with SP Flash Tool
- Confirm Infinix Hot 11 X689F matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3.48 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Infinix Hot 11 X689F free to download?
Yes, Infinix Hot 11 X689F can be downloaded free of charge from this page.
How large is the download?
The Infinix Hot 11 X689F package is 3.48 GB.
Which tool do I need to flash Infinix Hot 11 X689F?
Infinix Hot 11 X689F is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.