Infinix

Infinix Hot 11 X662

nfinix_Hot_11_X662_MT6768_V405_211009.zip
June 16, 2026 Infinix 2.92 GB Infinix

Infinix Hot 11 X662 is a Infinix firmware file listed under Infinix, distributed as nfinix_Hot_11_X662_MT6768_V405_211009.zip with a download size of 2.92 GB. It is built for the MediaTek MT6768 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2.92 GB
Download Free

About Infinix Hot 11 X662

Looking for the official stock firmware for your Infinix Hot 11 X662? You're in the right place. Below is the original Infinix flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: nfinix_Hot_11_X662_MT6768_V405_211009.zip File Size: 2.92 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Infinix Hot 11 X662 restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameInfinix Hot 11 X662
Packagenfinix_Hot_11_X662_MT6768_V405_211009.zip
Brand / PlatformInfinix
CategoryInfinix
ChipsetMediaTek MT6768
Flash toolSP Flash Tool
Package formatZIP archive
File size2.92 GB
Date addedJune 16, 2026
PriceFree

How to flash Infinix Hot 11 X662 with SP Flash Tool

  1. Confirm Infinix Hot 11 X662 matches your exact device model and that the phone uses the MT6768 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2.92 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Infinix Hot 11 X662 free to download?

Yes, Infinix Hot 11 X662 can be downloaded free of charge from this page.

How large is the download?

The Infinix Hot 11 X662 package is 2.92 GB.

Which tool do I need to flash Infinix Hot 11 X662?

Infinix Hot 11 X662 is MediaTek MT6768 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

More Infinix files

Back to Infinix