Infinix Hot 10i X658B
Infinix Hot 10i X658B is a Infinix firmware file listed under Infinix, distributed as Infinix_Hot_10i_X658B_MT6765_V214_201019.zip with a download size of 2.28 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Infinix Hot 10i X658B
Looking for the official stock firmware for your Infinix Hot 10i X658B? You're in the right place. Below is the original Infinix flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Infinix Hot 10i X658B a fresh start without the clutter that builds up over time. File Name: Infinix_Hot_10i_X658B_MT6765_V214_201019.zip File Size: 2.28 GB Back up your files, charge the Infinix Hot 10i X658B past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Infinix Hot 10i X658B should run like a brand new unit.
File Details
| File name | Infinix Hot 10i X658B |
|---|---|
| Package | Infinix_Hot_10i_X658B_MT6765_V214_201019.zip |
| Brand / Platform | Infinix |
| Category | Infinix |
| Chipset | MediaTek MT6765 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2.28 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Infinix Hot 10i X658B with SP Flash Tool
- Confirm Infinix Hot 10i X658B matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2.28 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Infinix Hot 10i X658B free to download?
Yes, Infinix Hot 10i X658B can be downloaded free of charge from this page.
How large is the download?
The Infinix Hot 10i X658B package is 2.28 GB.
Which tool do I need to flash Infinix Hot 10i X658B?
Infinix Hot 10i X658B is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.