Infinix

Infinix Hot 10 Play X688C

Infinix_Hot_10_Play_X688C_MT6765_V123_210324.zip
June 16, 2026 Infinix 1.70 GB Infinix

Infinix Hot 10 Play X688C is a Infinix firmware file listed under Infinix, distributed as Infinix_Hot_10_Play_X688C_MT6765_V123_210324.zip with a download size of 1.70 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 34 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.70 GB
Download Free

About Infinix Hot 10 Play X688C

If your Infinix Hot 10 Play X688C has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Infinix flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Infinix Hot 10 Play X688C a fresh start without the clutter that builds up over time. File Name: Infinix_Hot_10_Play_X688C_MT6765_V123_210324.zip File Size: 1.70 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Infinix Hot 10 Play X688C should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameInfinix Hot 10 Play X688C
PackageInfinix_Hot_10_Play_X688C_MT6765_V123_210324.zip
Brand / PlatformInfinix
CategoryInfinix
ChipsetMediaTek MT6765
Flash toolSP Flash Tool
Package formatZIP archive
File size1.70 GB
Date addedJune 16, 2026
PriceFree

How to flash Infinix Hot 10 Play X688C with SP Flash Tool

  1. Confirm Infinix Hot 10 Play X688C matches your exact device model and that the phone uses the MT6765 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.70 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Infinix Hot 10 Play X688C free to download?

Yes, Infinix Hot 10 Play X688C can be downloaded free of charge from this page.

How large is the download?

The Infinix Hot 10 Play X688C package is 1.70 GB.

Which tool do I need to flash Infinix Hot 10 Play X688C?

Infinix Hot 10 Play X688C is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Infinix devices. Always confirm it matches your specific model before flashing.

More Infinix files

Back to Infinix