iBall Andi 4.5 K6 Plus Stock Firmware
iBall Andi 4.5 K6 Plus Stock Firmware is a iBall firmware file listed under iBall, distributed as iBall_Andi_4.5_K6_Plus_25.12.2013.zip with a download size of 491 MB. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About iBall Andi 4.5 K6 Plus Stock Firmware
Here you will find all the latest iBall firmware for iBall Andi 4.5 K6 Plus. If you are looking for iBall Andi 4.5 K6 Plus stock ROM firmware, then you are on the right page. Before downloading, make sure your device is iBall Andi 4.5 K6 Plus, if it is not, then flashing the below stock firmware can brick your device. The iBall Andi 4.5 K6 Plus firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download iBall Andi 4.5 K6 Plus Firmware File Name : iBall_Andi_4.5_K6_Plus_25.12.2013.zip File Size : 491 MB Get Firmware File Name : iBall_Andi_4.5_K6_Plus_V06_MT6572_V1_2014-05-26.zip File Size : 497 MB Get Firmware File Name : iBall_Andi_4.5_K6_Plus_V07_MT6572_KK_20140825.zip File Size : 472 MB Get Firmware Also: iBall Andi 4.5 Ripple 3G Stock Firmware How To Flash iBall Andi 4.5 K6 Plus Stock Firmware Download and extract the iBall Andi 4.5 K6 Plus firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the iBall Andi 4.5 K6 Plus firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your iBall Andi 4.5 K6 Plus device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your iBall Andi 4.5 K6 Plus device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | iBall Andi 4.5 K6 Plus Stock Firmware |
|---|---|
| Package | iBall_Andi_4.5_K6_Plus_25.12.2013.zip |
| Brand / Platform | iBall |
| Category | iBall |
| File size | 491 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm iBall Andi 4.5 K6 Plus Stock Firmware matches your exact device model and that it is intended for iBall hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (491 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is iBall Andi 4.5 K6 Plus Stock Firmware free to download?
Yes, iBall Andi 4.5 K6 Plus Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The iBall Andi 4.5 K6 Plus Stock Firmware package is 491 MB.
Which devices is this firmware for?
This file is intended for iBall devices. Always confirm it matches your specific model before flashing.