Huawei

Huawei Y6 MYA-L11

Huawei_Y6_2017_MYA-L11_MT6737T_C368B124_14092018.zip
June 16, 2026 Huawei 1 GB Huawei

Huawei Y6 MYA-L11 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y6_2017_MYA-L11_MT6737T_C368B124_14092018.zip with a download size of 1 GB. It is built for the MediaTek MT6737T chipset, with a firmware build date of September 14, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Huawei Y6 MYA-L11

Looking for the official stock firmware for your Huawei Y6 MYA-L11? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Huawei Y6 MYA-L11 to factory condition. File Name: Huawei_Y6_2017_MYA-L11_MT6737T_C368B124_14092018.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Huawei Y6 MYA-L11 should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameHuawei Y6 MYA-L11
PackageHuawei_Y6_2017_MYA-L11_MT6737T_C368B124_14092018.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6737T
Build dateSeptember 14, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Y6 MYA-L11 with SP Flash Tool

  1. Confirm Huawei Y6 MYA-L11 matches your exact device model and that the phone uses the MT6737T chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei Y6 MYA-L11 free to download?

Yes, Huawei Y6 MYA-L11 can be downloaded free of charge from this page.

How large is the download?

The Huawei Y6 MYA-L11 package is 1 GB.

Which tool do I need to flash Huawei Y6 MYA-L11?

Huawei Y6 MYA-L11 is MediaTek MT6737T firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei