Huawei Y6 Elite LYO-L02
Huawei Y6 Elite LYO-L02 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y6_Elite_LYO-L02_MT6735_C712B102_19072016.zip with a download size of 656 MB. It is built for the MediaTek MT6735 chipset, with a firmware build date of July 19, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Y6 Elite LYO-L02
Looking for the official stock firmware for your Huawei Y6 Elite LYO-L02? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Huawei_Y6_Elite_LYO-L02_MT6735_C712B102_19072016.zip File Size: 656 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Huawei Y6 Elite LYO-L02 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Huawei Y6 Elite LYO-L02 |
|---|---|
| Package | Huawei_Y6_Elite_LYO-L02_MT6735_C712B102_19072016.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6735 |
| Build date | July 19, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 656 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Y6 Elite LYO-L02 with SP Flash Tool
- Confirm Huawei Y6 Elite LYO-L02 matches your exact device model and that the phone uses the MT6735 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (656 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Huawei Y6 Elite LYO-L02 free to download?
Yes, Huawei Y6 Elite LYO-L02 can be downloaded free of charge from this page.
How large is the download?
The Huawei Y6 Elite LYO-L02 package is 656 MB.
Which tool do I need to flash Huawei Y6 Elite LYO-L02?
Huawei Y6 Elite LYO-L02 is MediaTek MT6735 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.