Huawei Y5II CUN-L21
Huawei Y5II CUN-L21 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y5II_CUN-L21_MT6735_C578B125_13042017_5.1.zip with a download size of 1 GB. It is built for the MediaTek MT6735 chipset and runs Android 5.1 (Lollipop), with a firmware build date of April 13, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Y5II CUN-L21
If your Huawei Y5II CUN-L21 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Huawei flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei Y5II CUN-L21 back to square one. File Name: Huawei_Y5II_CUN-L21_MT6735_C578B125_13042017_5.1.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Huawei Y5II CUN-L21 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Huawei Y5II CUN-L21 |
|---|---|
| Package | Huawei_Y5II_CUN-L21_MT6735_C578B125_13042017_5.1.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6735 |
| Android version | Android 5.1 (Lollipop) |
| Build date | April 13, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Y5II CUN-L21 with SP Flash Tool
- Confirm Huawei Y5II CUN-L21 matches your exact device model and that the phone uses the MT6735 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Huawei Y5II CUN-L21 free to download?
Yes, Huawei Y5II CUN-L21 can be downloaded free of charge from this page.
How large is the download?
The Huawei Y5II CUN-L21 package is 1 GB.
Which tool do I need to flash Huawei Y5II CUN-L21?
Huawei Y5II CUN-L21 is MediaTek MT6735 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Huawei Y5II CUN-L21?
This firmware is Android 5.1 (Lollipop), built on April 13, 2017.
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.