Huawei Y5 Prime Dura-L22
Huawei Y5 Prime Dura-L22 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y5_Prime_2018_Dura-L22_MT6739_27032019.zip with a download size of 2 GB. It is built for the MediaTek MT6739 chipset, with a firmware build date of March 27, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Y5 Prime Dura-L22
Looking for the official stock firmware for your Huawei Y5 Prime Dura-L22? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei Y5 Prime Dura-L22 back to square one. File Name: Huawei_Y5_Prime_2018_Dura-L22_MT6739_27032019.zip File Size: 2 GB Back up your files, charge the Huawei Y5 Prime Dura-L22 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Huawei Y5 Prime Dura-L22 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Huawei Y5 Prime Dura-L22 |
|---|---|
| Package | Huawei_Y5_Prime_2018_Dura-L22_MT6739_27032019.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6739 |
| Build date | March 27, 2019 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Y5 Prime Dura-L22 with SP Flash Tool
- Confirm Huawei Y5 Prime Dura-L22 matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Huawei Y5 Prime Dura-L22 free to download?
Yes, Huawei Y5 Prime Dura-L22 can be downloaded free of charge from this page.
How large is the download?
The Huawei Y5 Prime Dura-L22 package is 2 GB.
Which tool do I need to flash Huawei Y5 Prime Dura-L22?
Huawei Y5 Prime Dura-L22 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.