Huawei

Huawei Y5 Prime Dura-L02

Huawei_Y5_Prime_2018_Dura-L02_MT6739_27032019.zip
June 16, 2026 Huawei 2 GB Huawei

Huawei Y5 Prime Dura-L02 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y5_Prime_2018_Dura-L02_MT6739_27032019.zip with a download size of 2 GB. It is built for the MediaTek MT6739 chipset, with a firmware build date of March 27, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2 GB
Download Free

About Huawei Y5 Prime Dura-L02

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei Y5 Prime Dura-L02 owners, this page hosts the original Huawei stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Huawei Y5 Prime Dura-L02 to factory condition. File Name: Huawei_Y5_Prime_2018_Dura-L02_MT6739_27032019.zip File Size: 2 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Huawei Y5 Prime Dura-L02 should run like a brand new unit.

File Details

File nameHuawei Y5 Prime Dura-L02
PackageHuawei_Y5_Prime_2018_Dura-L02_MT6739_27032019.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6739
Build dateMarch 27, 2019
Flash toolSP Flash Tool
Package formatZIP archive
File size2 GB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Y5 Prime Dura-L02 with SP Flash Tool

  1. Confirm Huawei Y5 Prime Dura-L02 matches your exact device model and that the phone uses the MT6739 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei Y5 Prime Dura-L02 free to download?

Yes, Huawei Y5 Prime Dura-L02 can be downloaded free of charge from this page.

How large is the download?

The Huawei Y5 Prime Dura-L02 package is 2 GB.

Which tool do I need to flash Huawei Y5 Prime Dura-L02?

Huawei Y5 Prime Dura-L02 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei