Huawei

Huawei Y5 Prime DRA-LX2

Huawei_Y5_Prime_2018_DRA-LX2_MT6739_27032019.zip
June 16, 2026 Huawei 2 GB Huawei

Huawei Y5 Prime DRA-LX2 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y5_Prime_2018_DRA-LX2_MT6739_27032019.zip with a download size of 2 GB. It is built for the MediaTek MT6739 chipset, with a firmware build date of March 27, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2 GB
Download Free

About Huawei Y5 Prime DRA-LX2

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei Y5 Prime DRA-LX2 owners, this page hosts the original Huawei stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Huawei Y5 Prime DRA-LX2 to factory condition. File Name: Huawei_Y5_Prime_2018_DRA-LX2_MT6739_27032019.zip File Size: 2 GB Back up your files, charge the Huawei Y5 Prime DRA-LX2 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Huawei Y5 Prime DRA-LX2 should run like a brand new unit.

File Details

File nameHuawei Y5 Prime DRA-LX2
PackageHuawei_Y5_Prime_2018_DRA-LX2_MT6739_27032019.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6739
Build dateMarch 27, 2019
Flash toolSP Flash Tool
Package formatZIP archive
File size2 GB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Y5 Prime DRA-LX2 with SP Flash Tool

  1. Confirm Huawei Y5 Prime DRA-LX2 matches your exact device model and that the phone uses the MT6739 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei Y5 Prime DRA-LX2 free to download?

Yes, Huawei Y5 Prime DRA-LX2 can be downloaded free of charge from this page.

How large is the download?

The Huawei Y5 Prime DRA-LX2 package is 2 GB.

Which tool do I need to flash Huawei Y5 Prime DRA-LX2?

Huawei Y5 Prime DRA-LX2 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei