Huawei Y360-U61
Huawei Y360-U61 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y360-U61_MT6582_V100R001C328B101_05021UGC_11052015.zip with a download size of 810 MB. It is built for the MediaTek MT6582 chipset, with a firmware build date of May 11, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 13 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Y360-U61
If your Huawei Y360-U61 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Huawei flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei Y360-U61 a fresh start without the clutter that builds up over time. File Name: Huawei_Y360-U61_MT6582_V100R001C328B101_05021UGC_11052015.zip File Size: 810 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Huawei Y360-U61 should run like a brand new unit.
File Details
| File name | Huawei Y360-U61 |
|---|---|
| Package | Huawei_Y360-U61_MT6582_V100R001C328B101_05021UGC_11052015.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6582 |
| Build date | May 11, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 810 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Y360-U61 with SP Flash Tool
- Confirm Huawei Y360-U61 matches your exact device model and that the phone uses the MT6582 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (810 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6582 Firmware: Flashing Tools and Safety GuideThe MT6582 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device powered by this chipset, you will typically need the SP Flash Tool and the…
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Huawei Y360-U61 free to download?
Yes, Huawei Y360-U61 can be downloaded free of charge from this page.
How large is the download?
The Huawei Y360-U61 package is 810 MB.
Which tool do I need to flash Huawei Y360-U61?
Huawei Y360-U61 is MediaTek MT6582 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.