# Huawei Y320-U30

> Huawei Y320-U30 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y320-U30_MT6572_V100R001C113B200N_Indonesia_Telkomsel.zip with a download size of 537 MB. It is built for the MediaTek MT6572 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-y320-u30-100792>

## File details

- **File name:** Huawei Y320-U30
- **Package:** Huawei_Y320-U30_MT6572_V100R001C113B200N_Indonesia_Telkomsel.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Chipset:** MediaTek MT6572
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 537 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-y320-u30-100792>

## About Huawei Y320-U30

Looking for the official stock firmware for your Huawei Y320-U30? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei Y320-U30 back to square one. File Name: Huawei_Y320-U30_MT6572_V100R001C113B200N_Indonesia_Telkomsel.zip File Size: 537 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Huawei Y320-U30 should boot up like new. Use the right file for your exact model and don't interrupt the process.

## How to flash Huawei Y320-U30 with SP Flash Tool

1. Confirm Huawei Y320-U30 matches your exact device model and that the phone uses the MT6572 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (537 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6572 Firmware: Flashing Tools and Safety Guide](https://www.filefirmware.com/blog/mt6572-firmware-flashing-tools-and-safety-guide): The MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…

## Frequently asked questions

### Is Huawei Y320-U30 free to download?

Yes, Huawei Y320-U30 can be downloaded free of charge from its web page.

### How large is the download?

The Huawei Y320-U30 package is 537 MB.

### Which tool do I need to flash Huawei Y320-U30?

Huawei Y320-U30 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-y320-u30-100792>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
