Huawei Y3 II LUA-U22
Huawei Y3 II LUA-U22 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y3_II_LUA-U22_MT6582_01052016_5.1.zip with a download size of 558 MB. It is built for the MediaTek MT6582 chipset and runs Android 5.1 (Lollipop), with a firmware build date of May 01, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Y3 II LUA-U22
The Huawei Y3 II LUA-U22 runs on Huawei's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Huawei_Y3_II_LUA-U22_MT6582_01052016_5.1.zip File Size: 558 MB Back up your files, charge the Huawei Y3 II LUA-U22 past 50 percent, install the matching drivers, and only then begin. When it finishes, the Huawei Y3 II LUA-U22 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Huawei Y3 II LUA-U22 |
|---|---|
| Package | Huawei_Y3_II_LUA-U22_MT6582_01052016_5.1.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6582 |
| Android version | Android 5.1 (Lollipop) |
| Build date | May 01, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 558 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Y3 II LUA-U22 with SP Flash Tool
- Confirm Huawei Y3 II LUA-U22 matches your exact device model and that the phone uses the MT6582 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (558 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6582 Firmware: Flashing Tools and Safety GuideThe MT6582 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device powered by this chipset, you will typically need the SP Flash Tool and the…
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Huawei Y3 II LUA-U22 free to download?
Yes, Huawei Y3 II LUA-U22 can be downloaded free of charge from this page.
How large is the download?
The Huawei Y3 II LUA-U22 package is 558 MB.
Which tool do I need to flash Huawei Y3 II LUA-U22?
Huawei Y3 II LUA-U22 is MediaTek MT6582 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Huawei Y3 II LUA-U22?
This firmware is Android 5.1 (Lollipop), built on May 01, 2016.
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.