# Huawei Y3 CAG-L23

> Huawei Y3 CAG-L23 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y3_2018_CAG-L23_CairoGO-L22_B048_MT6737M_Board_Software_General_Android_8.1_05022KSE.zip with a download size of 1 GB. It is built for the MediaTek MT6737M chipset and runs Android 8.1. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-y3-cag-l23-100786>

## File details

- **File name:** Huawei Y3 CAG-L23
- **Package:** Huawei_Y3_2018_CAG-L23_CairoGO-L22_B048_MT6737M_Board_Software_General_Android_8.1_05022KSE.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Chipset:** MediaTek MT6737M
- **Android version:** Android 8.1 (Oreo)
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 1 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-y3-cag-l23-100786>

## About Huawei Y3 CAG-L23

Looking for the official stock firmware for your Huawei Y3 CAG-L23? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Huawei_Y3_2018_CAG-L23_CairoGO-L22_B048_MT6737M_Board_Software_General_Android_8.1_05022KSE.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Huawei Y3 CAG-L23 should run like a brand new unit.

## How to flash Huawei Y3 CAG-L23 with SP Flash Tool

1. Confirm Huawei Y3 CAG-L23 matches your exact device model and that the phone uses the MT6737M chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (1 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6737M Firmware: Flashing Guide and Supported Devices](https://www.filefirmware.com/blog/mt6737m-firmware-flashing-guide-and-supported-devices): The MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…

## Frequently asked questions

### Is Huawei Y3 CAG-L23 free to download?

Yes, Huawei Y3 CAG-L23 can be downloaded free of charge from its web page.

### How large is the download?

The Huawei Y3 CAG-L23 package is 1 GB.

### Which tool do I need to flash Huawei Y3 CAG-L23?

Huawei Y3 CAG-L23 is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Huawei Y3 CAG-L23?

This firmware is Android 8.1 (Oreo).

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-y3-cag-l23-100786>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
