Huawei Watch 2 Leo-B09
Huawei Watch 2 Leo-B09 is a Huawei firmware file listed under Huawei, distributed as Huawei_Watch_2_Leo-B09_1.3.10.99_Board_Software_General_QFIL.zip with a download size of 250 MB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 39 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Watch 2 Leo-B09
The Huawei Watch 2 Leo-B09 runs on Huawei's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Huawei Watch 2 Leo-B09 to factory condition. File Name: Huawei_Watch_2_Leo-B09_1.3.10.99_Board_Software_General_QFIL.zip File Size: 250 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Huawei Watch 2 Leo-B09 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Huawei Watch 2 Leo-B09 |
|---|---|
| Package | Huawei_Watch_2_Leo-B09_1.3.10.99_Board_Software_General_QFIL.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Platform | Qualcomm |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 250 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Watch 2 Leo-B09 with QFIL
- Confirm Huawei Watch 2 Leo-B09 matches your exact device model and that it is intended for Huawei hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (250 MB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
Frequently asked questions
Is Huawei Watch 2 Leo-B09 free to download?
Yes, Huawei Watch 2 Leo-B09 can be downloaded free of charge from this page.
How large is the download?
The Huawei Watch 2 Leo-B09 package is 250 MB.
Which tool do I need to flash Huawei Watch 2 Leo-B09?
Huawei Watch 2 Leo-B09 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.