# Huawei Nova 4 Plus Clone

> Huawei Nova 4 Plus Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_Nova_4_Plus_Clone_MT6572_Foreign_260319_4.4.2.zip with a download size of 228 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/huawei-nova-4-plus-clone-100050>

## File details

- **File name:** Huawei Nova 4 Plus Clone
- **Package:** Huawei_Nova_4_Plus_Clone_MT6572_Foreign_260319_4.4.2.zip
- **Brand / platform:** Huawei
- **Category:** [Huawei](https://www.filefirmware.com/category/huawei)
- **Chipset:** MediaTek MT6572
- **Android version:** Android 4.4 (KitKat)
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 228 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/huawei-nova-4-plus-clone-100050>

## About Huawei Nova 4 Plus Clone

Looking for the official stock firmware for your Huawei Nova 4 Plus Clone? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei Nova 4 Plus Clone a fresh start without the clutter that builds up over time. File Name: Huawei_Nova_4_Plus_Clone_MT6572_Foreign_260319_4.4.2.zip File Size: 228 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Huawei Nova 4 Plus Clone returns to factory state. If something fails, verify the file matches your model and retry.

## How to flash Huawei Nova 4 Plus Clone with SP Flash Tool

1. Confirm Huawei Nova 4 Plus Clone matches your exact device model and that the phone uses the MT6572 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (228 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6572 Firmware: Flashing Tools and Safety Guide](https://www.filefirmware.com/blog/mt6572-firmware-flashing-tools-and-safety-guide): The MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- [Huawei Firmware Guide: Finding and Flashing Stock ROMs](https://www.filefirmware.com/blog/huawei-firmware-guide-finding-and-flashing-stock-roms): To reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…

## Frequently asked questions

### Is Huawei Nova 4 Plus Clone free to download?

Yes, Huawei Nova 4 Plus Clone can be downloaded free of charge from its web page.

### How large is the download?

The Huawei Nova 4 Plus Clone package is 228 MB.

### Which tool do I need to flash Huawei Nova 4 Plus Clone?

Huawei Nova 4 Plus Clone is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Huawei Nova 4 Plus Clone?

This firmware is Android 4.4 (KitKat).

### Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

## More Huawei files

- [Huawei Y9 Prime STK-L22](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22-100996) — 1 GB
- [Huawei Y9 Prime STK-L22HN](https://www.filefirmware.com/file/huawei-y9-prime-stk-l22hn-100985) — 3.31 GB
- [Huawei Y9 Prime STK-LX1](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx1-100983) — 2.95 GB
- [Huawei Y9 Prime Stark-L21](https://www.filefirmware.com/file/huawei-y9-prime-stark-l21-100982) — 2.95 GB
- [Huawei Y9 Prime STK-LX2](https://www.filefirmware.com/file/huawei-y9-prime-stk-lx2-100981) — 1 GB
- [Huawei Y9 Prime Stark-L22B](https://www.filefirmware.com/file/huawei-y9-prime-stark-l22b-100978) — 3.54 GB
- [Huawei Y9 Prime STK-L21](https://www.filefirmware.com/file/huawei-y9-prime-stk-l21-100977) — 2.95 GB
- [Huawei Y9 Jackman-L22](https://www.filefirmware.com/file/huawei-y9-jackman-l22-100976) — 3.32 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/huawei-nova-4-plus-clone-100050>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
