Huawei

Huawei Nexus 6P Nin-A1

Huawei_Nexus_6P_Nin-A1_HL0MSM8994MT011008_Board_Software_General_Android_5.1_QFIL.zip
June 16, 2026 Huawei 509 MB Huawei

Huawei Nexus 6P Nin-A1 is a Huawei firmware file listed under Huawei, distributed as Huawei_Nexus_6P_Nin-A1_HL0MSM8994MT011008_Board_Software_General_Android_5.1_QFIL.zip with a download size of 509 MB. It is built for Qualcomm-based devices and runs Android 5.1 (Lollipop). It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
509 MB
Download Free

About Huawei Nexus 6P Nin-A1

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei Nexus 6P Nin-A1 owners, this page hosts the original Huawei stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei Nexus 6P Nin-A1 back to square one. File Name: Huawei_Nexus_6P_Nin-A1_HL0MSM8994MT011008_Board_Software_General_Android_5.1_QFIL.zip File Size: 509 MB Back up your files, charge the Huawei Nexus 6P Nin-A1 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Huawei Nexus 6P Nin-A1 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameHuawei Nexus 6P Nin-A1
PackageHuawei_Nexus_6P_Nin-A1_HL0MSM8994MT011008_Board_Software_General_Android_5.1_QFIL.zip
Brand / PlatformHuawei
CategoryHuawei
PlatformQualcomm
Android versionAndroid 5.1 (Lollipop)
Flash toolQFIL (part of Qualcomm QPST)
Package formatZIP archive
File size509 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Nexus 6P Nin-A1 with QFIL

  1. Confirm Huawei Nexus 6P Nin-A1 matches your exact device model and that it is intended for Huawei hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (509 MB) using the button above and extract it on a Windows PC.
  4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
  5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
  6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
  7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Frequently asked questions

Is Huawei Nexus 6P Nin-A1 free to download?

Yes, Huawei Nexus 6P Nin-A1 can be downloaded free of charge from this page.

How large is the download?

The Huawei Nexus 6P Nin-A1 package is 509 MB.

Which tool do I need to flash Huawei Nexus 6P Nin-A1?

Huawei Nexus 6P Nin-A1 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

What Android version is Huawei Nexus 6P Nin-A1?

This firmware is Android 5.1 (Lollipop).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei