Huawei

Huawei MediaPad T3 10.0 AGS-L03

Huawei_MediaPad_T3_10.0_AGS-L03_C500B001_Board_Software_China_Nonspecific_Android_7.0_MFU_QFIL.zip
June 16, 2026 Huawei 1.2 GB Huawei

Huawei MediaPad T3 10.0 AGS-L03 is a Huawei firmware file listed under Huawei, distributed as Huawei_MediaPad_T3_10.0_AGS-L03_C500B001_Board_Software_China_Nonspecific_Android_7.0_MFU_QFIL.zip with a download size of 1.2 GB. It is built for Qualcomm-based devices and runs Android 7.0 (Nougat). It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 39 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.2 GB
Download Free

About Huawei MediaPad T3 10.0 AGS-L03

Looking for the official stock firmware for your Huawei MediaPad T3 10.0 AGS-L03? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei MediaPad T3 10.0 AGS-L03 back to square one. File Name: Huawei_MediaPad_T3_10.0_AGS-L03_C500B001_Board_Software_China_Nonspecific_Android_7.0_MFU_QFIL.zip File Size: 1.2 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Huawei MediaPad T3 10.0 AGS-L03 should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameHuawei MediaPad T3 10.0 AGS-L03
PackageHuawei_MediaPad_T3_10.0_AGS-L03_C500B001_Board_Software_China_Nonspecific_Android_7.0_MFU_QFIL.zip
Brand / PlatformHuawei
CategoryHuawei
PlatformQualcomm
Android versionAndroid 7.0 (Nougat)
Flash toolQFIL (part of Qualcomm QPST)
Package formatZIP archive
File size1.2 GB
Date addedJune 16, 2026
PriceFree

How to flash Huawei MediaPad T3 10.0 AGS-L03 with QFIL

  1. Confirm Huawei MediaPad T3 10.0 AGS-L03 matches your exact device model and that it is intended for Huawei hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.2 GB) using the button above and extract it on a Windows PC.
  4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
  5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
  6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
  7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Frequently asked questions

Is Huawei MediaPad T3 10.0 AGS-L03 free to download?

Yes, Huawei MediaPad T3 10.0 AGS-L03 can be downloaded free of charge from this page.

How large is the download?

The Huawei MediaPad T3 10.0 AGS-L03 package is 1.2 GB.

Which tool do I need to flash Huawei MediaPad T3 10.0 AGS-L03?

Huawei MediaPad T3 10.0 AGS-L03 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

What Android version is Huawei MediaPad T3 10.0 AGS-L03?

This firmware is Android 7.0 (Nougat).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei