Huawei

Huawei Honor 4A SCL-TL10

Huawei_Honor_4A_SCL-TL10_C01B057_Board_Software_China_05021UVD_QPST.zip
June 16, 2026 Huawei 1 GB Huawei

Huawei Honor 4A SCL-TL10 is a Huawei firmware file listed under Huawei, distributed as Huawei_Honor_4A_SCL-TL10_C01B057_Board_Software_China_05021UVD_QPST.zip with a download size of 1 GB. It is built for Qualcomm-based devices. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Huawei Honor 4A SCL-TL10

If your Huawei Honor 4A SCL-TL10 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Huawei flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Huawei_Honor_4A_SCL-TL10_C01B057_Board_Software_China_05021UVD_QPST.zip File Size: 1 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Huawei Honor 4A SCL-TL10 should run like a brand new unit.

File Details

File nameHuawei Honor 4A SCL-TL10
PackageHuawei_Honor_4A_SCL-TL10_C01B057_Board_Software_China_05021UVD_QPST.zip
Brand / PlatformHuawei
CategoryHuawei
PlatformQualcomm
Flash toolQFIL (part of Qualcomm QPST)
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Honor 4A SCL-TL10 with QFIL

  1. Confirm Huawei Honor 4A SCL-TL10 matches your exact device model and that it is intended for Huawei hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
  5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
  6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
  7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Frequently asked questions

Is Huawei Honor 4A SCL-TL10 free to download?

Yes, Huawei Honor 4A SCL-TL10 can be downloaded free of charge from this page.

How large is the download?

The Huawei Honor 4A SCL-TL10 package is 1 GB.

Which tool do I need to flash Huawei Honor 4A SCL-TL10?

Huawei Honor 4A SCL-TL10 is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei