Huawei

Huawei Ascend Y600

Huawei_Ascend_Y600_MT6572_U20V100R001C435B012_DCC_4.2.zip
June 16, 2026 Huawei 477 MB Huawei

Huawei Ascend Y600 is a Huawei firmware file listed under Huawei, distributed as Huawei_Ascend_Y600_MT6572_U20V100R001C435B012_DCC_4.2.zip with a download size of 477 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.2 (Jelly Bean). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
477 MB
Download Free

About Huawei Ascend Y600

Looking for the official stock firmware for your Huawei Ascend Y600? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Huawei Ascend Y600 to factory condition. File Name: Huawei_Ascend_Y600_MT6572_U20V100R001C435B012_DCC_4.2.zip File Size: 477 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Huawei Ascend Y600 should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameHuawei Ascend Y600
PackageHuawei_Ascend_Y600_MT6572_U20V100R001C435B012_DCC_4.2.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6572
Android versionAndroid 4.2 (Jelly Bean)
Flash toolSP Flash Tool
Package formatZIP archive
File size477 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Ascend Y600 with SP Flash Tool

  1. Confirm Huawei Ascend Y600 matches your exact device model and that the phone uses the MT6572 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (477 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei Ascend Y600 free to download?

Yes, Huawei Ascend Y600 can be downloaded free of charge from this page.

How large is the download?

The Huawei Ascend Y600 package is 477 MB.

Which tool do I need to flash Huawei Ascend Y600?

Huawei Ascend Y600 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Huawei Ascend Y600?

This firmware is Android 4.2 (Jelly Bean).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei